Fort Lauderdale, FL Certification

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994, AND ANSI/NCSL Z540.3-2006

Technical Maintenance, Inc.
12240 SW 53rd Street, Suite 506
Fort Lauderdale, FL 33330
Scott Chamberlain Phone: 945-525-2223

CALIBRATION

Valid to: September 20, 2018 Certificate Number: AC-2080.07

Acoustics and Vibration

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

Accelerometers –

Acceleration (7 < 10) Hz (10 < 30) Hz

(30 < 2000) Hz

(2 to 10) kHz

(0.01 to 10) g

4 % of reading

3 % of reading

1.5 % of reading

4 % of reading

Accelerometer

Calibrator

Dimensional

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

Calipers3

Up to 46 in

(28 + 9L) μin

Gage blocks (Grade 2)

Micrometers3

Up to 46 in

(28 + 5L) μin

Gage blocks (Grade 2)

Dial Indicators3

Up to 44 in

(3 + 60L) μin

Gage blocks (Grade 2)

Height Gages3

Up to 46 in

(200 + 4L) μin

Gage blocks (Grade 2)

Scales – Rulers3

Up to 46 in

0.0091 in

Gage blocks (Grade 2)

Feeler Gages3

Up to 1 in

33 μin

P&W Model C

Cylindrical Gages –

Inside

Outside

Up to 11 in

Up to 10 in

(16 + 2D) µin

(9 + 2D) µin

Gage blocks, P&W universal measuring machine

Gage Blocks – Length Only

Up to 10 in

(2.5 + 2.9L) µin

Master gage blocks, P&W

universal measuring machine



Version 002 Issued: 05/25/2017 Page 1 of 10
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Dimensional

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

Thread Plugs –

Major

Pitch Diameter

Up to 10 in

Up to 10 in

46 µin

80 µin

P & W Model C, Van

Keuren thread wire set,

gage blocks,

P & W Model C, VanKeren thread wire set

Electrical – DC/Low Frequency

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

DC Voltage – Generate3

Up to 330 mV

330 mV to 3.3 V (3.3 to 33) V

(33 to 330) V (330 to 1 000) V

24 μV/V + 1 μV

14 μV/V + 2 μV

14 μV/V + 20 μV

22 μV/V + 150 μV

22 μV/V + 1.5 mV

Fluke 5522A

DC Voltage – Measure3

Up to 100 mV

100 mV to 1V

(1 to 10) V (10 to 100) V

(100 to 1 000) V

12 μV/V + 0.3 μV

11 μV/V + 0.3 μV

11 μV/V + 0.5 μV

13 μV/V + 30 μV

12 μV/V + 100 μV

HP 3458A

DC Voltage – Measure3

(1 to 40) kV

2.3%

Fluke 80k-40

DC Current – Generate3

Up to 330 µA

330 µA to 3.3 mA

(3.3 to 330) mA

330 mA to 1.1 A (1.1 to 3.0) A

(3.0 to 11) A (11 to 20.5) A

0.017 % + 20 nA

0.012 % + 50 nA

0.012 % + 2.5 μA

0.023 % + 40 μA

0.045 % + 40 μA

0.059 % + 500 μA

0.13 % + 0.75 mA

Fluke 5522A

DC Current – Generate3

Clamps Only

10 – Turn Coil

3.2 to 32 A

32 to 105 A

105 to 200 A

0.16% + 1.2 ma

0.16% + 9.4 ma

0.16% + 45 ma

Fluke 9100-200 Coils

DC Current – Generate3

Clamps Only

50 – Turn Coil

16 to 160 A

160 to 525 A

525 to 1000 A

0.16% + 5.9 ma

0.16% + 47 ma

0.16% + 225 ma

Fluke 9100-200 Coils

DC Current – Measure3

Up to 100 nA

100 nA to 100 µA

100 µA to 10 mA

(10 to 100) mA

100 mA to 1 A

24 μA/A + 0.04 nA

23 μA/A + 0.8 nA

23 μA/A + 50 nA

41 μA/A + 0.5 μA

0.013 % + 10 μA

HP 3458A

DC Current – Measure3

(1 to 50) A

0.29 %

Empro shunts



Version 002 Issued: 05/25/2017 Page 2 of 10
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

Resistance – Generate3

Up to 11 Ω

(11 to 33) Ω

(33 to 110) Ω

(110 to 330) Ω

330 Ω to 1.1 kΩ

(1.1 to 3.3) kΩ

(3.3 to 11) kΩ

(11 to 33) kΩ

(33 to 110) kΩ

(110 to 330) kΩ

330 kΩ to 1.1 MΩ

(1.1 to 3.3) MΩ

(3.3 to 11) MΩ

(11 to 33) MΩ

(33 to 110) MΩ

(110 to 330) MΩ

330 MΩ to 1.1 GΩ

47 μΩ/Ω + 0.01 Ω

42 μΩ/Ω + 0.015 Ω

34 μΩ/Ω + 0.015 Ω

32 μΩ/Ω + 0.02 Ω

33 μΩ/Ω + 0.02 Ω

33 μΩ/Ω + 0.2 Ω

33 μΩ/Ω + 0.1 Ω

33 μΩ/Ω + 1 Ω

33 μΩ/Ω + 1 Ω

37 μΩ/Ω + 10 Ω

37 μΩ/Ω + 10 Ω

70 μΩ/Ω + 150 Ω

0.015 % + 0.25 kΩ

0.029 % + 2.5 kΩ

0.06 % + 3 kΩ

0.35 % + 0.1 MΩ

1.7 % + 0.5 MΩ

Fluke 5522A

Resistance – Measure3

Up to 10 Ω

(10 to 100) Ω

100 Ω to 100 kΩ

100 kΩ to 1 MΩ

(1 to 10) MΩ

(10 to 100) MΩ

100 MΩ to 1 GΩ

28 μΩ/Ω + 50 μΩ

18 μΩ/Ω + 0.5 mΩ

16 μΩ/Ω + 5 mΩ

26 μΩ/Ω + 2 Ω

68 μΩ/Ω + 100 Ω

0.59 % + 1 kΩ

0.6 % + 10 kΩ

HP 3458A

Capacitance – Generate3

(0.19 to 3.3) nF (3.3 to 329.999) nF

(0.33 to 3.3) μF (3.3 to 11) μF

(11 to 33) μF

(33 to 110) μF (110 to 330) μF

(0.33 to 1.1) mF

(1.1 to 3.3) mF (3.3 to 11) mF

(11 to 33) mF (33 to 110) mF

10 Hz to 10 kHz

10 Hz to 1 kHz

(10 to 600) Hz

(10 to 150) Hz

(10 to 120) Hz

(10 to 80) Hz

(10 to 50) Hz

(10 to 20) Hz

(6 to 10) Hz

(2 to 10) Hz (0.6 to 10) Hz (0.2 to 10) Hz

1.9 % + 0.01 nF

0.44 % + 0.3 nF

0.48 % + 3 nF

0.48 % + 10 nF

0.50 % + 30 nF

0.67 % + 100 nF

0.76 % + 300 nF

0.72 % + 1 μF

0.73 % + 3 μF

0.71 % + 10 μF

1.1 % + 30 μF

1.5 % + 100 μF

Fluke 5522A



Version 002 Issued: 05/25/2017 Page 3 of 10
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

AC Voltage – Generate3

(1 to 33) mV

(10 to 45) Hz

45 Hz to 10 kHz

(10 to 20) kHz

(20 to 50) kHz

(50 to 100) kHz

(100 to 500) kHz

(33 to 330) mV

(10 to 45) Hz

45 Hz to 10 kHz

(10 to 20) kHz

(20 to 50) kHz

(50 to 100) kHz

(100 to 500) kHz

330 mV to 3.3 V

(10 to 45) Hz

45 Hz to 10 kHz

(10 to 20) kHz

(20 to 50) kHz

(50 to 100) kHz

(100 to 500) kHz

(3.3 to 33) V

(10 to 45) Hz

45 Hz to 10 kHz

(10 to 20) kHz

(20 to 50) kHz

(50 to 100) kHz

1.1 mV /V + 6 μV

0.53 mV/V + 6 μV

0.55 mV/V + 6 μV

1.3 mV/V + 6 μV

4.1 mV/V + 12 μV

9.3 mV/V + 50 μV

0.39 mV/V + 8 μV

0.17 mV/V + 8 μV

0.19 mV/V + 8 μV

0.41 mV/V + 8 μV

0.93 mV/V + 32 μV

2.3 mV/V + 70 μV

0.38 mV/V + 50 μV

0.18 mV/V + 25 μV

0.22 mV/V + 50 μV

0.35 mV/V + 50 μV

0.81 mV/V + 130 μV

2.8 mV/V + 600 μV

0.43 mV/V + 650 μV

0.22 mV/V + 200 μV

0.31 mV/V + 600 μV

0.46 mV/V + 600 μV

1.1 mV/V + 1.6 mV

Fluke 5522A

AC Voltage – Generate3

(33 to 330) V

45 Hz to 1 kHz

(1 to 10) kHz

(10 to 20) kHz

(20 to 50) kHz

(50 to 100) kHz

(330 to 1020) V

45 Hz to 1 kHz

(1 to 5) kHz

(5 to 10) kHz

0.85 mV/V + 2 mV

0.86 mV/V + 6 mV

0.87 mV/V + 6 mV

0.89 mV/V + 6 mV

2.5 mV/V + 50 mV

8.2 mV/V + 10 mV

8.2 mV/V + 10 mV

8.2 mV/V + 10 mV

Fluke 5522A



Version 002 Issued: 05/25/2017 Page 4 of 10
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

AC Voltage – Measure3

Up to 10 mV

(1 to 40) Hz

40 Hz to 1 kHz

(1 to 20) kHz (20 to 50) kHz (50 to 100) kHz

(100 to 300) kHz

10 mV to 100 mV

(1 to 40) Hz

40 Hz to 1 kHz (1 to 20) kHz (20 to 50) kHz

(50 to 100) kHz

(100 to 300) kHz

300 kHz to 1 MHz

(1 to 2) MHz

(0.100 to 1) V

(1 to 40) Hz

40 Hz to 1 kHz (1 to 20) kHz (20 to 50) kHz

(50 to 100) kHz

(100 to 300) kHz

300 kHz to 1 MHz

(1 to 2) MHz

(1 to 10) V

(1 to 40) Hz

40 Hz to 1 kHz (1 to 20) kHz (20 to 50) kHz

(50 to 100) kHz

(100 to 300) kHz

300 kHz to 1 MHz

(1 to 2) MHz

(10 to 100) V

(1 to 40) Hz

40 Hz to 1 kHz (1 to 20) kHz (20 to 50) kHz

(50 to 100) kHz

(100 to 300) kHz

300 kHz to 1 MHz

(100 to 700) V

(1 to 40) Hz

40 Hz to 1 kHz

(1 to 20) kHz

(20 to 50) kHz

(50 to 100) kHz

0.044 % + 3 µV

0.026 % + 1.1 µV

0.044 % + 1.1 µV

0.11 % + 1.1 µV

0.5 % + 1.1 µV

4 % + 2 µV

0.019 % + 4 µV

0.019 % + 2 µV

0.027 % + 2 µV

0.045 % + 2 µV

0.09 % + 2 µV

0.31 % + 0.01 mV

1 % + 0.01 mV

1.5 % + 0.01 mV

0.019 % + 0.04 mV

0.019 % + 0.02 mV

0.027 % + 0.02 mV

0.045 % + 0.02 mV

0.09 % + 0.02 mV

0.31 % + 0.1 mV

1 % + 0.1 mV

1.5 % + 0.1 mV

0.019 % + 0.4 mV

0.019 % + 0.2 mV

0.027 % + 0.2 mV

0.045 % + 0.2 mV

0.09 % + 0.2 mV

0.31 % + 1 mV

1 % + 1 mV

1.5 % + 1 mV

0.026 % + 2 µV

0.041 % + 2 µV

0.038 % + 2 µV

0.048 % + 2 µV

0.13 % + 2 µV V

0.4 % + 0.01 V

1.5 % + 0.01 V

0.05 % + 0.04 V

0.05 % + 0.02 V

0.07 % + 0.02 V

0.13 % + 0.02 V

0.3 % + 0.02 V

HP 3458A

AC Voltage – Measure3

(1 to 28) kV

60 Hz

5.8 %

HP 34401A / Fluke 80k-40



Version 002 Issued: 05/25/2017 Page 5 of 10
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

AC Current – Generate3

40 Hz to 1 kHz

(29 to 330) µA

330 μA to 3.3 mA

(3.3 to 33) mA (33 mA to 330) mA

330 mA to 1.1 A

(1.1 to 3) A (3 to 11) A

(11 to 20.5) A

0.21 % + 0.1 μA

0.13 % + 0.15 μA

0.08 % + 2 μA

0.08 % + 20 μA

0.08 % + 100 μA

0.09 % + 1 mA

0.13 % + 2 mA

0.13 % + 5 mA

Fluke 5522A

AC Current – Measure3

Up to 100 μA

(10 to 20) Hz

(20 to 45) Hz

45 Hz to 1 kHz

100 μA to 100 mA

(10 to 20) Hz

(20 to 45) Hz

(45 to 100) Hz

100 Hz to 5 kHz

(5 to 20) kHz

(20 to 50) kHz

(50 to 100) kHz

100 mA to 1 A

(10 to 20) Hz

(20 to 45) Hz

(45 to 100) Hz

100 Hz to 5 Hz

(5 to 20) kHz

(20 to 50) kHz

0.47 % + 0.03 pA

0.18 % + 0.03 pA

0.08 % + 0.03 pA

0.47 % + 20 μA

0.18 % + 20 μA

0.09 % + 20 μA

0.04 % + 20 μA

0.08 % + 20 μA

0.47 % + 40 μA

0.64 % + 150 μA

0.62 % + 0.2 mA

0.25 % + 0.2 mA

0.13 % + 0.2 mA

0.16 % + 0.2 mA

0.46 % + 0.2 mA

1.5 % + 0.4 mA

HP 3458A

AC Current – Measure3

1 A to 50 A

10 Hz to 20 kHz

0.32 %

Empro shunts

Oscilloscopes3

Vertical Deflection

1 kHz square wave

into a 50 Ω load

1 kHz square wave into a 1 MΩ

load

Flatness

Leveled Sine Wave

5 mV to 5.5 V

ref @ 50 kHz

BANDWIDTH

Rise Time

Time Interval

1 mV to 6.6 V pk – pk

1 mV to 130 V pk – pk

50 kHz to 100 MHz (100 to 300) MHz (300 to 600) MHz (600 to 1 100) MHz

<300 ps

1 ns to 100 ms

100 ms to 5 s

0.9 % + 40 μV

0.37 % + 40 μV

2.6 % + 0.1 mV

2.8 % + 0.1 mV

5 % + 0.1 mV

6.2 % + 0.1 mV

+ 20 ps / -117 ps

3.1 μs/s

(32 + 1 000t) μs/s

Fluke 5522A/SC1100



Version 002 Issued: 05/25/2017 Page 6 of 10
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

Electrical Calibration of Thermocouple Indicators3

Type E

(-250 to -100) °C (-100 to 650) °C (650 to 1 000) °C

0.58 °C

0.2 °C

0.25 °C

Fluke 5522A

Electrical Calibration of Thermocouple Indicators3

Type J

(-210 to -100) °C (-100 to 760) °C (760 to 1 200) °C

0.33 °C

0.23 °C

0.29 °C

Fluke 5522A

Electrical Calibration of Thermocouple Indicators3

Type K

(-200 to -100) °C (-100 to 120) °C (12C to 1 000) °C (1 000 to 1 372) °C

0.4 °C

0.23 °C

0.32 °C

0.47 °C

Fluke 5522A

Electrical Calibration of Thermocouple Indicators3

Type N

(-200 to -100) °C (-100 to 410) °C (410 to 1 300) °C

0.47 °C

0.26 °C

0.32 °C

Fluke 5522A

Electrical Calibration of Thermocouple Indicators3

Type R

(0 to 250) °C (250 to 1 000) °C

(1 000 to 1 760) °C

0.66 °C

0.41 °C

0.47 °C

Fluke 5522A

Electrical Calibration of Thermocouple Indicators3

Type T

(-250 to -150) °C (-150 to 0) °C

(0 to 400) °C

0.74 °C

0.3 °C

0.22 °C

Fluke 5522A

Electrical Calibration of RTD Indicators3

Pt 385,100 Ω

(-200 °C to -80) °C

(-80 °C to 0) °C

(0 °C to 100) °C (100 °C to 300) °C (300 °C to 400) °C

(400 °C to 630) °C (630 °C to 800) °C

0.58 °C

0.058 °C

0.081 °C

0.1 °C

0.12 °C

0.14 °C

0.27 °C

Fluke 5522A

Electrical Calibration of RTD Indicators3

Pt 3926,100 Ω

(-200 to -80) °C (-80 to 0) °C

(0 to 100) °C

(100 to 300) °C (300 to 400) °C (400 to 630) °C

0.07 °C

0.12 °C

0.081 °C

0.1 °C

0.12 °C

0.14 °C

Fluke 5522A

Electrical Calibration of RTD Indicators3

Pt 3916,100 Ω

(-200 to -190) °C

(-190 to -80) °C (-80 to -0) °C (0 to 100) °C

(100 to 260) °C (260 to 300) °C (300 to 400) °C

(400 to 600) °C (600 to 630) °C

0.29 °C

0.047 °C

0.058 °C

0.07 °C

0.081 °C

0.093 °C

0.1 °C

0.12 °C

0.27 °C

Fluke 5522A



Version 002 Issued: 05/25/2017 Page 7 of 10
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

Pt 385,200 Ω

(-200 to -80) °C

(-80 to 0) °C

(0 to 100) °C (100 to 260) °C (260 to 300) °C

(300 to 400) °C (400 to 600) °C (600 to 630) °C

0.047 °C

0.047 °C

0.047 °C

0.058 °C

0.14 °C

0.15 °C

0.16 °C

0.19 °C

Electrical Calibration of RTD Indicators3

Pt 385,500 Ω

(-200 to -80) °C

(-80 to 0) °C (0 to 100) °C (100 to 260) °C

(260 to 300) °C (300 to 400) °C (400 to 600) °C

(600 to 630) °C

0.048 °C

0.059 °C

0.059 °C

0.07 °C

0.093 °C

0.093 °C

0.11 °C

0.13 °C

Fluke 5522A

Electrical Calibration of RTD Indicators3

Pt 385,1000 Ω

(-200 to -80) °C (-80 to 0) °C

(0 to 100) °C

(100 to 260) °C (260 to 300) °C (300 to 400) °C

(400 to 600) °C (600 to 630) °C

0.07 °C

0.037 °C

0.048 °C

0.059 °C

0.07 °C

0.082 °C

0.082 °C

0.27 °C

Fluke 5522A

Electrical Calibration of RTD Indicators3

PtNi 385, 120 Ω (Ni120)

(-80 to 0) °C (0 to 100) °C (100 to 260) °C

0.093 °C

0.093 °C

0.16 °C

Fluke 5522A

Electrical Calibration of RTD Indicators3

Cu 427, 10 Ω [3]

100 °C to 260) °C

0.35 °C

Fluke 5522A

Electrical – RF/Microwave

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

RF Attenuation3–Measure

(2.5 to 1 300) MHz

(0 to -10) dB

(-11 to -20) dB

(-21 to -30) dB (-31 to -40) dB

(-41 to -50) dB

(-51 to -60) dB (-61 to -70) dB

(-71 to -80) dB

(-81 to -90) dB

(-91 to -100) dB

(-101 to -110) dB

(-111 to -120) dB

0.023 dB

0.033 dB

0.052 dB

0.052 dB

0.057 dB

0.069 dB

0.1 dB

0.1 dB

0.11 dB

0.12 dB

0.13 dB

0.27 dB

HP 8902A, HP 11722A



Version 002 Issued: 05/25/2017 Page 8 of 10
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – RF/Microwave

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

RF Attenuation3–Measure

(1.3 to 26.5) GHz

(0 to -10) dB

(-11 to -20) dB

(-21 to -30) dB (-31 to -40) dB

(-41 to -50) dB

(-51 to -60) dB (-61 to -70) dB

(-71 to -80) dB

(-81 to -90) dB

(-91 to -100) dB

0.031 dB

0.031 dB

0.032 dB

0.034 dB

0.037 dB

0.04 dB

0.081 dB

0.13 dB

0.14 dB

0.16 dB

HP 8902A, HP 11792A

Amplitude Modulation3

Measure

150 kHz to 10 MHz

(10 to 1300) MHz

(1.3 to 26.5) GHz

(5 to 99) %Depth

5.3 %Depth % + 1 digit

4.1 %Depth + 1 digit

4.7 %%Depth + 1 digit

HP 8902A

Frequency Modulation3

Measure

(< 400 kHz)

250 kHz to 10 MHz

10 MHz to 26.5 GHz

3.3 % + 1 digit

2.6 % + 1 digit

HP 8902A

Phase Modulation3 – Measure

200 Hz to 10 kHz

150 kHz to 10 MHz

10 MHz to 26.5 GHz

5.7 % + 1 digit

4.8 % + 1 digit

HP 8902A Opt 50

RF Power3 – Measure

(-20 to 30) dBm

100 kHz to 2.6 GHz

(0.1 to 26.5) GHz

3.6%

4.6 %

HP 8902A/HP 11722A

11792A

Power Meters3

3 µW to 100 mW

0.32 %

HP 11683A

Distortion – Measure

20 Hz to 20 kHz

(20 to 100) kHz

1.2 dB

2.3 dB

HP 8903B

Phase Angle

(1 to 65) Hz

(65 to 500) Hz

500 Hz to 1 kHz

(1 to 5) kHz

(5 to 10) kHz

(10 to 30) kHz

0.14 %

0.3 %

0.61 %

2.9 %

5.8%

12%

Fluke 5522A

Mechanical

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

Scales & Balances3

(0.01 to 0.5) g

(0.5 to 10) g

(10 to 100) g

0.012 mg + 0.6R

0.058 mg + 0.6R

0.29 mg + 0.6R

Class 1 weights

Scales & Balances3

Up to 100 lb

(100 to 200) lb

(200 to 400) lb

6.2 g + 0.6R

9.3 g + 0.6R

26 g + 0.6R

Class F weights

Torque3 – Measure

(10 to 100) ozf⋅in

50 lbf⋅in to 250 lbf⋅ft

(250 to 1 000) lbf⋅ft

0.69 %

0.46 %

0.63 %

CDI 1001-0-DDT CDI 5000-ST CDI 2000-13-02



Version 002 Issued: 05/25/2017 Page 9 of 10
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Mechanical

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

Pressure3

(0.2 to 50.5) psi

(50 to 1 000) psi

0.0022 %

0.013 %

Ruska 2468A

Pressure3

(-15 to 100) psi

(100 to 500) psi

(500 to 1 000) psi

(1000 to 10 000) psi

0.09 psi

0.32 psi

0.79 psi

0.094 psi

Fluke 741B w/700PD6,

700G08, 700P08, 700P31

Force3 –Tension and

Compression

Up to 100 gf

Up to 300 lbf

0.01 grams

0.086 %

Class 1 weights

Class 7 weights

Thermodynamics

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

Temperature3 – Measure

(-25 to 350) ˚C

0.21 ˚C

Hart 1502 with 5622 PRT

Temperature3 –Measuring

Equipment

(-25 to 140) ˚C

0.23 ˚C

Hart 1502 with 5622 PRT

and dry block

IR Temperature3

(35 to 199) °C

0.75 °C

Hart 9130

Relative Humidity3 – Measuring

Equipment

11 % RH

33 % RH

75 % RH

97 % RH

1.2 % RH

1.1 % RH

1.3 % RH

2.8 % RH

Standard salts

Relative Humidity3

Measure

Up to 90% RH

(90 to 97) % RH

1.8 % RH

2.8 % RH

Vaisalla HM141/HMP46

Time and Frequency

Parameter / Equipment

Range

Expanded Uncertainty of

Measurement (+/-)

Reference Standard, Method and/or Equipment

Frequency – Measure

10 MHz

10 Hz to 26.5 GHz

6.1 parts in 1012

5.2 parts in 1010

HP 58503 A/B GPS /EIP548

Frequency3 – Measuring

Equipment

Up to 250 kHz

250 kHz to 3 GHz

(3 to 26.5) GHz

8.2 parts in 108

6.6 parts in 108

2.9 parts in 107

HP 3325A Opt 1

HP E4436B

HP 8673G

Frequency3 – Measure

10 Hz to 26.5 GHz

5.2 parts in 106

EIP 548

Notes:

1. Calibration and Measurement Capabilities (Expanded Uncertainties) are based on approximately a 95% confidence interval, using a coverage of k=2.
2. This laboratory also offers field calibration services.
3. L = length in inches, D = diameter in inches
4. This scope is formatted as part of a single document including Certificate of Accreditation No. AC-2080.07.


Comments are closed.