Norcross, GA Certification

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994, AND ANSI/NCSL Z540.3-2006
Technical Maintenance, Inc.
3000 Northwoods Parkway, Suite 270
Norcross, GA 30071
Scott Chamberlain Phone: 770-409-8348

CALIBRATION

Valid to: September 20, 2018 Certificate Number: AC-2080.01

Chemical

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

pH – Meters3

(4, 7, 10) pH

0.02 pH

Standard pH buffers

Dimensional

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

Calipers2,3

Up to 46 in

(47 + 8L) µin

Grade 2 gage blocks

Micrometers2,3

Up to 46 in

(28 + 5L) µin

Grade 2 gage blocks

Bore Micrometers

(0.125 to 2) in

98 µin

Master ring gages

Dial Indicators2,3

Up to 0.2 in

Up to 6 in

Up to 1 in

15 µin

(81 + 1.2L) µin

150 µin

Grade 2 gage blocks

Starrett 716

Height Gages2,3

Up to 46 in

(300 + 2L) µin

Grade 2 gage blocks

Scales – Rulers3

Up to 46 in

0.009 in

Grade 2 gage blocks

Feeler Gages3

Up to 1 in

93 µin

Mitutoyo 293-369

Surface Plates3

Overall Flatness

Local Area Flatness

(18 x 18) in to (6 × 6) ft

Up to (6×6) ft

170 µin

120 µin

Rahn Planekator

Repeat-o-meter



Version 001 Issued: 10/14/2016 Page 1 of 11
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Dimensional

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

Gage Blocks2

Up to 10 in

(3.3 + 2.5L) μin

Universal measuring machine, master gage block set

Protractors3

(0 to 360) º

0.014 º

Angle blocks

Radius Gages

(0.125 to 1) inch

340 µin

Optical comparator

Cylindrical Gages2,3

Plain Pin, Plugs

Rings

(0 to 12) in

(0.04 to 14) in

(5.4 + 2.2D) µin

(16 + 1.5D) µin

Master gage blocks, P&W universal measuring machine

Thread Plugs –

Major

Pitch Diameter

(6 to 80) TPI

Up to 12 in

Up to 12 in

36 µin

91 µin

Gage blocks,

P & W universal measuring

machine, VanKeren thread

wire set

Thread Rings2

Up to 12 in

(350 + 47D) µin

Thread setting plug gages

Dimensional Testing

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

1D Length

Up to 12 in

350 µin

Optical comparator

Angle

Up to 360º

0.06º

Optical comparator

Electrical – DC/Low Frequency

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

DC Voltage – Generate3

Up to 220 mV (0.22 to 2.2) V (2.2 to 11) V (11 to 22) V (22 to 220) V

(220 to 1 100) V

11 µV/V + 0.4 µV

8.2 µV/V + 0.7 µV

7.1 µV/V + 2.5 µV

7.1 µV/V + 4 µV

8.2 µV/V + 40 µV

10 µV/V + 0.4 mV

Fluke 5720A

DC Voltage – Generate3

(1 to 60) kV

0.13 %

Ross VD60

DC Voltage – Measure3

Up to 100 mV

(0.1to 1) V (1 to 10) V (10 to 100) V

(100 to 1 000) V

10 μV/V + 0.3 μV

9 μV/V + 0.3 μV

9 μV/V + 0.5 μV

11 μV/V + 30 μV

11 μV/V + 0.1 mV

HP 3458A

DC Voltage – Measure3

(1 to 6) kV

2.3 % + 10 V

Associated Research

5560DT



Version 001 Issued: 10/14/2016 Page 2 of 11
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

DC Current – Generate3

Up to 220 µA

(0.22 to 2.2) mA

(2.2 to 22) mA

(22 to 220) mA (0.22 to 2.2) A

55 µA/A + 6 nA

50 µA/A + 7 nA

50 µA/A + 40 nA

60 µA/A + 0.7 µA

98 µA/A + 12 µA

Fluke 5720A

DC Current – Generate3

(2.2 to 20.5) A

0.11 % + 750 µA

Fluke 5522A

DC Current – Generate3Clamp

Only

Up to 1 000 A

0.77 % + 0.5 A

Fluke 5522A / coil

DC Current – Measure3

Up to 100 nA (0.1 to 1) µA (1 to 10) µA

(10 to 100) µA (0.1to 10) mA

(10 to 100) mA (0.1 to 1) A

36 μA/A + 0.04 nA

24 μA/A + 0.04 nA

24 μA/A + 0.1 nA

24 μA/A + 0.8 nA

25 μA/A + 0.05 μA

43 μA/A + 0.5 μA

0.14 mA/A + 10 μA

HP 3458A

DC Current – Measure3

(1 to 500) A

0.32 %

Current shunts

Resistance3

Fixed Points

1 Ω, 1.9 Ω

10 Ω, 19 Ω

100 Ω, 190 Ω

1 kΩ, 1.9 kΩ

10 kΩ, 19 kΩ

100 kΩ, 190 kΩ

1 MΩ

1.9 MΩ

10 MΩ

19 MΩ

100 MΩ

0.12 mΩ/Ω

31 μΩ/Ω

23 μΩ/Ω

12 μΩ/Ω

13 μΩ/Ω

14 μΩ/Ω

24 μΩ/Ω

26 μΩ/Ω

50 μΩ/Ω

59 μΩ/Ω

0.14 mΩ/Ω

Fluke 5720A

Resistance3

Generate

Up to 11 Ω (11 to 33) Ω (33 to 110) Ω (110 to 330) Ω

(0.33 to 1.1) kΩ (1.1 to 3.3) kΩ (3.3 to 11) kΩ (11 to 33) kΩ (33 to 110) kΩ (110 to 330) kΩ

(0.33 to 1.1) MΩ (1.1 to 3.3) MΩ (3.3 to 11) MΩ (11 to 33) MΩ (33 to 110) MΩ (110 to 330) MΩ (0.33 to 1.1) GΩ

47 μΩ/Ω + 10 mΩ

42 μΩ/Ω + 15 mΩ

34 μΩ/Ω + 15 mΩ

32 μΩ/Ω + 0.02 Ω

33 μΩ/Ω + 0.02 Ω

33 μΩ/Ω + 0.1 Ω

33 μΩ/Ω + 0.1 Ω

33 μΩ/Ω + 1 Ω

33 μΩ/Ω + 1 Ω

37 μΩ/Ω + 10 Ω

37 μΩ/Ω + 10 Ω

70 μΩ/Ω + 0.15 kΩ

0.015 % + 0.25 kΩ

0.029 % + 2.5 kΩ

0.06 % + 3 kΩ

0.35 % + 0.1 MΩ

1.7 % + 0.5 MΩ

Fluke 5522A

Resistance – Measure3

Up to 10 Ω

(10 to 100) Ω (0.1 to 100) kΩ (0.1 to 1) M (1 to 10) MΩ

(10 to 100) MΩ

(0.1 to 1) GΩ

18 μΩ/Ω + 5 μΩ

15 μΩ/Ω + 5 μΩ

13 μΩ/Ω + 5 mΩ

18 μΩ/Ω + 2 Ω

58 μΩ/Ω + 0.1 kΩ

0.059 % + 1 kΩ

0.29 % + 10 kΩ

HP 3458A



Version 001 Issued: 10/14/2016 Page 3 of 11
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

Capacitance – Generate3

(0.19 to 0.1099) nF

(1.1 to 3.299) nF

(3.3 to 329.999) nF

(0.33 to 3.29999) μF (3.3 to 10.999) μF (10.999 to 32.9999) μF

(33 to 109.999) μF (110 to 329.999) μF (0.33 to 1.09999) mF

(1.1 to 3.2999) mF (3.3 to 10.9999) mF (11 to 32.9999) mF

(33 to 110) mF

0.6 % + 0.01 nF

0.32 % + 0.01 nF

0.32 % + 0.3 nF

0.32 % + 3 nF

0.32 % + 10 nF

0.48 % + 30 nF

0.54 % + 0.1 µF

0.55 % + 0.3 µF

0.54 % + 1 μF

0.54 % + 3 μF

0.54 % + 10 μF

0.87 % + 30 μF

1.3 % + 100 μF

Fluke 5522A

Capacitance – Measure3

0.1 pF to 10 mF

0.78 % of rdg

Fluke PM 6304C

AC Voltage – Generate3

Up to 22 mV

(10 to 20) Hz

(20 to 40) Hz

40 Hz to 20 kHz

(20 to 50) kHz (50 to 100) kHz (100 to 300) kHz

(300 to 500) kHz

500 kHz to 1 MHz

(22 to 220) mV

(10 to 20) Hz

(20 to 40) Hz

40 Hz to 20 kHz

(20 to 50) kHz

(50 to 100) kHz

(100 to 300) kHz

(300 to 500) kHz

(0.22 500 kHz to 1 MHz to 2.2) V

(10 to 20) Hz

(20 to 40) Hz

40 Hz to 20 kHz

(20 to 50) kHz (50 to 100) kHz (100 to 300) kHz

(300 to 500) kHz

500 kHz to 1 MHz

(2.2 to 22) V

(10 to 20) Hz

(20 to 40) Hz

40 Hz to 20 kHz

(20 to 50) kHz (50 to 100) kHz (100 to 300) kHz

(300 to 500) kHz

500 kHz to 1 MHz

0.36 mV/V + 5 µV

0.15 mV/V + 5 µV

0.13 mV/V + 5 µV

0.3 mV/V + 5 µV

0.71 mV/V + 6 µV

1.6 mV/V + 12 µV

2 mV/V + 25 µV

4 mV/V + 25 µV

0.35 mV/V + 15 µV

0.14 mV/V + 8 µV

0.12 mV/V + 8 µV

0.29 mV/V + 8 µV

0.7 mV/V + 20 µV

1.3 mV/V + 25 µV

2 mV/V + 30 µV

3.9 mV/V + 60 µV

0.51 mV/V + 50 µV

0.4 mV/V + 20 µV

0.38 mV/V + 10 µV

1.4 mV/V + 12 µV

0.41 mV/V + 40 µV

0.69 mV/V + 0.1 mV

1.5 mV/V + 0.25 mV

2.4 mV/V + 0.4 mV

0.48 mV/V + 0.5 mV

0.39 mV/V + 0.2 mV

0.38 mV/V + 70 µV

0.39 mV/V + 0.12 mV

0.4 mV/V + 0.25 mV

0.5 mV/V + 0.8 mV

1.3 mV/V + 2.5 mV

1.9 mV/V + 4 mV

Fluke 5720A



Version 001 Issued: 10/14/2016 Page 4 of 11
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

AC Voltage – Generate3

(22 to 220) V

(10 to 20) Hz

(20 to 40) Hz

40 Hz to 20 kHz (20 to 50) kHz (50 to 100) kHz

(100 to 300) kHz

(300 to 500) kHz

500 kHz to 1 MHz

0.51 mV/V + 5 mV

0.4 mV/V + 2 mV

0.38 mV/V + 0.7 mV

0.39 mV/V + 1.2 mV

0.43 mV/V + 3 mV

1.4 mV/V + 20 mV

6.3 mV/V + 50 mV

12 mV/V + 0.1 V

Fluke 5720A

AC Voltage – Generate3

(220 to 1 100) V

40 Hz to 1 kHz

(1 to 20) kHz

(20 to 30) kHz

(220 to 750) V

(30 to 50) kHz

(50 to 100) kHz

0.38 mV/V + 0.7 mV

0.39 mV/V + 1.2 mV

0.43 mV/V + 3 mV

0.39 mV/V + 1.2 mV

0.43 mV/V + 3 mV

Fluke 5720A/5725A

AC Voltage – Generate3

(1 to 5) kV

(50, 60) Hz

2.4 % + 10 V

Associated Research

5560 DT

AC Voltage – Measure3

Up to 10 mV

(1 to 40) Hz

40 Hz to 1 kHz

(1 to 20) kHz (20 to 50) kHz (50 to 100) kHz

(100 to 300) kHz

10 mV to 100 mV

(1 to 40) Hz

40 Hz to 1 kHz

(1 to 20) kHz

(20 to 50) kHz

(50 to 100) kHz

(100 to 300) kHz

300 kHz to 1 MHz

(1 to 2) MHz

(0.1 to 1) V

(1 to 40) Hz

40 Hz to 1 kHz (1 to 20) kHz (20 to 50) kHz

(50 to 100) kHz

(100 to 300) kHz

300 kHz to 1 MHz

(1 to 2) MHz

(1 to 10) V

(1 to 40) Hz

40 Hz to 1 kHz

(1 to 20) kHz

(20 to 50) kHz

(50 to 100) kHz

(100 to 300) kHz

300 kHz to 1 MHz

(1 to 2) MHz

0.044 % + 0.003 mV

0.026 % + 0.0011 mV

0.044 % + 0.0011 mV

0.11 % + 0.0011 mV

0.5 % + 0.0011 mV

4 % + 0.002 mV

0.019 % + 0.004 mV

0.019 % + 0.002 mV

0.027 % + 0.002 mV

0.045 % + 0.002 mV

0.09 % + 0.002 mV

0.31 % + 0.01 mV

1 % + 0.01 mV

1.5 % + 0.01 mV

0.019 % + 0.04 mV

0.019 % + 0.02 mV

0.027 % + 0.02 mV

0.045 % + 0.02 mV

0.09 % + 0.02 mV

0.31 % + 0.1 mV

1 % + 0.1 mV

1.5 % + 0.1 mV

0.019 % + 0.0004 V

0.019 % + 0.0002 V

0.027 % + 0.0002 V

0.045 % + 0.0002 V

0.09 % + 0.0002 V

0.31 % + 0.001 V

1 % + 0.001 V

1.5 % + 0.001 V

HP 3458A



Version 001 Issued: 10/14/2016 Page 5 of 11
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

AC Voltage – Measure3

(10 to 100) V

(1 to 40) Hz

40 Hz to 1 kHz

(1 to 20) kHz (20 to 50) kHz (50 to 100) kHz

(100 to 300) kHz

(100 300 kHz to 1 MHz to 700) V

(1 to 40) Hz

40 Hz to 1 kHz

(1 to 20) kHz

(20 to 50) kHz

(50 to 100) kHz

0.026 % + 0.002 V

0.041 % + 0.002 V

0.038 % + 0.002 V

0.048 % + 0.002 V

0.13 % + 0.002 V

0.4 % + 0.01 V

1.5 % + 0.01 V

0.05 % + 0.04 V

0.05 % + 0.02 V

0.07 % + 0.02 V

0.13 % + 0.02 V

0.3 % + 0.02 V

HP 3458A

AC Voltage – Measure3

(1 to 42) kV

(50 to 60) Hz

6.3 V

Ross VD60

AC Current – Generate3

Up to 200 µA

(10 to 20) Hz

(20 to 40) Hz

40 Hz to 1 kHz

(1 to 5) kHz

(5 to 10) kHz

(0.2 to 2.2) mA

(10 to 20) Hz

(20 to 40) Hz

40 Hz to 1 kHz

(1 to 5) kHz

(5 to 10) kHz

(2.2 to 22) mA

(10 to 20) Hz

(20 to 40) Hz

40 Hz to 1 kHz

(1 to 5) kHz

(5 to 10) kHz

(22 to 200) mA

(10 to 20) Hz

(20 to 40) Hz

40 Hz to 1 kHz

(1 to 5) kHz

(5 to 10) kHz

(0.2 to 2.2) A

20 Hz to 1 kHz

(1 to 5) kHz

(5 to 10) kHz

0.36 mA/A + 20 nA

0.25 mA/A + 12 nA

0.19 mA/A + 10 nA

0.42 mA/A + 15 nA

1.6 mA/A + 80 nA

0.36 mA/A + 50 nA

0.25 mA/A + 40 nA

0.18 mA/A + 40 nA

0.3 mA/A + 0.18 µA

1.6 mA/A + 0.8 µA

0.26 mA/A + 0.5 µA

0.24 mA/A + 0.4 µA

0.18 mA/A + 0.4 µA

0.3 mA/A + 0.7 µA

1.6 mA/A + 6 µA

0.36 mA/A + 5 µA

0.24 mA/A + 4 µA

0.18 mA/A + 3 µA

0.3 mA/A + 4 µA

1.6 mA/A + 12 µA

0.28 mA/A + 40 µA

0.6 mA/A + 0.1 mA

9.3 mA/A + 0.2 mA

Fluke 5720A

AC Current – Generate3

(2.2 to 11) A

40 Hz to 1 kHz

(1 to 5) kHz

(5 to 10) kHz

0.81 mA/A + 0.17 mA

1.3 mA/A + 0.38 mA

4.3 mA/A + 0.75 mA

Fluke 5720A/5725A

AC Current – Generate3

(20.5 to 1 000) A

(45 to 440) Hz

1.5 % + 0.9 A

Fluke 5522A / coil



Version 001 Issued: 10/14/2016 Page 6 of 11
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

AC Current – Measure3

Up to 100 μA

(10 to 20) Hz

(20 to 45) Hz

45 Hz to 1 kHz

(0.1 to 100) mA

(10 to 20) Hz

(20 to 45) Hz

(45 to 100) Hz

100 Hz to 5 kHz

(5 to 20) kHz (20 to 50) kHz (50 to 100) kHz

(0.1 to 1) A

(10 to 20) Hz

(20 to 45) Hz

(45 to 100) Hz

100 Hz to 5 kHz

(5 to 20) kHz

(20 to 50) kHz

0.47 % + 0.03 pA

0.19 % + 0.03 pA

0.084 % + 0.03 pA

0.47 % + 20 μA

0.18 % + 20 μA

0.09 % + 20 μA

0.042 % + 20 μA

0.078 % + 20 μA

0.47 % + 40 μA

0.64 % + 0.15 mA

0.47 % + 0.2 mA

0.19 % + 0.2 mA

0.10 % + 0.2 mA

0.12 % + 0.2 mA

0.35 % + 0.2 mA

1.2 % + 0.4 mA

HP 3458A

AC Current – Measure3

(1 to 50) A

(45 to 400) Hz

0.06 %

Current shunt

Low Frequency Power –

Generate3

(45 to 65) Hz

1 PF

Up to 20 kW

0.42 % of rdg

Fluke 5522A

Electrical Calibration of Thermocouple Indicators3

Type J Type K Type N Type T

(-210 to 1 200) °C (-200 to 1 372) °C (-200 to 1 300) °C (-250 to 400) °C

0.34 °C

0.48 °C

0.47 °C

0.74 °C

Fluke 5522A

Electrical Calibration of RTD Indicators2,3

Pt 385, 100 Ω Pt 3926, 100 Ω Pt 3916, 100 Ω Pt 385, 200 Ω

PtNi 385, 120 Ω (Ni120)

Cu 427, 10 Ω [3]

(-200 to 800) °C (-200 to 800) °C (-200 to 630) °C (-200 to 800) °C (-80 to 260) °C (100 to 260) °C

(0.08 + 0.00021T) °C (0.08 + 0.00011T) °C (0.12 + 0.00005T) °C (0.10 + 0.00022T) °C (0.11 + 0.00023T) °C

0.35 °C

Fluke 5522A



Version 001 Issued: 10/14/2016 Page 7 of 11
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – DC/Low Frequency

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

Oscilloscopes3

Vertical Deflection

1 kHz Square Wave

into a 50 Ω load

1 kHz Square Wave into a 1 MΩ

load

Rise Time

Flatness

Leveled Sine Wave

5 mV to 5.5 V Reference at 50 kHz

Time Interval2

1 mV to 6.6 Vpk – pk

1 mV to 130 Vpk – pk

>300 ps

50 kHz to 100 MHz (100 to 300) MHz (300 to 600) MHz (600 to 1 100) MHz

1 ns to 20 ms

50 ms to 5 s

0.89 % + 40 μV

0.35 % + 40 μV

(+15 / -120) ps

2.3 % + 0.1 mV

2.6 % + 0.1 mV

4.9 % + 0.1 mV

6.1 % + 0.1 mV

3.9 μs/s

(29 + 1 000t) μs/s

Fluke 5522A/SC1100

Electrical – RF/Microwave

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

Attenuation3 – Measure

10 MHz to 50 GHz

10 MHz to 50 GHz

10 MHz to 50 GHz

10 MHz to 50 GHz

10 MHz to 50 GHz

10 MHz to 50 GHz

10 MHz to 50 GHz

10 MHz to 45 GHz

10 MHz to 41 GHz

10 MHz to 31.15 GHz

10 MHz to 26.5 GHz

10 MHz to 3.05 GHz

(-10 to 0) dB

(-20 to -11) dB

(-30 to -21) dB

(-40 to -31) dB

(-50 to -41) dB

(-60 to -51) dB

(-70 to -61) dB (-80 to -71) dB (-90 to -81) dB

(-100 to -91) dB

(-110 to -101) dB

(-120 to -111) dB

0.025 dB

0.025 dB

0.025 dB

0.025 dB

0.025 dB

0.043 dB

0.043 dB

0.043 dB

0.043 dB

0.043 dB

0.056 dB

0.057 dB

Agilent E4448A with

N5532S

RF Power – Measure

100 kHz to 4.2 GHz

10 MHz to 18 GHz

10 MHz to 26.5 GHz

(26.5 to 50) GHz

(-30 to 20) dBm

(-20 to 30) dBm

(-10 to 20) dBm

4.2 % of rdg

4.9 % of rdg

4.8 % of rdg

7 % of rdg

HP 8482A HP 8481A

Agilent E4448A with

N5532S

HP 8487A/HP E4418B

RF Power – Generate

10 MHz to 40 GHz

10 MHz to 40 GHz

10 MHz to 40 GHz

1.5 MHz to 1.0 GHz

(-10 to 10) dBm

(-60 to -10) dBm

(-110 to -60) dBm

(0 to 50) W

1.8 dBm

2.2 dBm

2.8 dBm

1.8 mW

HP 83460B opt 01

ENI 550 Amp, ENI 6100L Amp & HP 8482A



Version 001 Issued: 10/14/2016 Page 8 of 11
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Electrical – RF/Microwave

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

Amplitude

Modulation3 – Measure

100 kHz to 10 MHz

10 MHz to 3 GHz

10 MHz to 3 GHz

(3 to 26.5) GHz (3 to 26.5) GHz (26.5 to 31.5) GHz

(26.5 to 31.5) GHz (31.5 to 50) GHz (31.5 to 50) GHz

(5 to 99) %Depth (5 to 20) %%Depth (20 to 99) %Depth (5 to 20) %Depth (20 to 99) % Depth (5 to 20) % Depth (20 to 99) % Depth (5 to 20) % Depth (20 to 99) % Depth

1 % Depth

2.9 % Depth

0.82 % Depth

5.2 % Depth

1.8 % Depth

7.9 % Depth

2.3 % Depth

30 % Depth

7 % Depth

Agilent E4448A with

N5532S

Frequency Modulation3

Measure

250 kHz to 10 MHz

10 MHz to 6.6 GHz (6.6 to 13.2) GHz (13.2 to 31.15) GHz (31.15 to 50) GHz

20 Hz to 10 kHz

(50 to 200) Hz

1.8 %

1.8 %

2.9 %

4.4 %

9.8 %

Agilent E4448A with

N5532S

Phase Modulation3

100 kHz to 50 GHz

3.5 %

Agilent E4448A with

N5532S

Audio Distortion

400 Hz and 1 kHz

5.8 %

HP 8902A

Amplitude Modulation

Distortion3 – Measure

(0.1 to 10) MHz

10 MHz to 26.5 GHz

(26.5 to 50) GHz

1.1 %

1.3 %

7.2 %

Agilent E4448A with

N5532S

Frequency Modulation

Distortion3 – Measure

1 MHz to 50 GHz

0.67 %

Agilent E4448A with

N5532S

Harmonic Distortion

20 Hz to 20 kHz

20 kHz to 50 GHz

(-120 to 0) dB

1.7 dB

0.91 dB

HP 8903A

Agilent E4448A with

N5532S

Power Meters3

3 µW to 100 mW

0.3 % of rdg

HP 11683A

Mechanical

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

Scales & Balances2,3

(1 to 20) g

(20 to 200) g

Up to 450 lb

0.084 mg + 0.6R

0.67 mg + 0.6R

8.5 g + 0.6R

Class 1 weights

Class F weights

Low Pressure – Measure3

(0 to 23) psia

(0 to 7) psig

0.02 psia

0.006 psig

Paroscientific 760-23A

Pressure Gauges3

(5 to 15 000) psi

0.04 % of rdg

Ametek type T

Vacuum Gages

(0 to 30) inHg

0.075 inHg

Paroscientific 760-23A



Version 001 Issued: 10/14/2016 Page 9 of 11
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Mechanical

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

Torque Wrenches3

(4 to 1 000) lbf·in

(25 to 1 000) lbf·ft

0.4 %

0.49 %

CDI torque system

Torque Analyzers

Up to 250 lbf·ft

0.11 %

Weights and arm

Force Gages

Tension & Compression3

10 mgf to 540 lbf

0.06 % of rdg

Class 1 and

Class F weights

Mass – Class F

(5 to 225) g (2 to 10) lb (25 to 50) lb

0.49 mg

0.028 g

0.3 g

Master balances

Indirect Verification of Rockwell

Hardness Testers3

(20 to 69) HRA (70 to 79) HRA (80 to 86) HRA

(0 to 59) HRBW (60 to 79) HRBW (80 to 100) HRBW

(20 to 39) HRC (40 to 59) HRC (60 to 70) HRC

1.3 HRA

1.3 HRA

0.73 HRA

1.9 HRBW

1.3 HRBW

1.3 HRBW

1.3 HRC

1.3 HRC

0.73 HRC

Hardness blocks

Direct Verification of

Durometers –

Scale Accuracy

Type A, B, C, D, M

Indenter Geometry Length Diameter Angle

(0 to 100) duros

0.1 in

0.05 in

(30 to 35) °

0.01 duros

340 µin

340 µin

0.085 °

Master balance

Optical comparator

Thermodynamic

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

Temperature – Measure3

(-200 to 600) ºC

0.025 °C

Hart 1502 with Fluke 5628

Temperature – Measuring

Equipment

(-25 to 0) °C (0 to 350) ºC

0.16 °C

0.14 °C

Hart 1502 with Fluke 5628 and dry block

Humidity – Measure3

(0 to 90) % RH

1.7 % RH

Vaisala HM141/HMP46

IR Thermometry3

(Ambient to 100) ºC (100 to 300) ºC

(300 to 500) ºC

0.68 ºC

0.85 ºC

1 ºC

Fluke 9132



Version 001 Issued: 10/14/2016 Page 10 of 11
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org

Time and Frequency

Parameter/ Equipment

Range

Calibration and Measurement

Capability

[Expressed as Uncertainty (±)]

Reference Standard or

Equipment

Frequency – Measuring

Equipment3

100 MHz to 40 GHz

2.3 parts in 109

HP 83640B

Frequency – Measure

10 MHz

1 part in 1011

HP 58503A

Frequency – Measure3

10 Hz to 46 GHz

1.2 parts in 108

HP 53152A

Notes:

1. Calibration and Measurement Capabilities (Expanded Uncertainties) are based on approximately a 95% confidence interval, using a coverage of k=2.
2. L = length in inches, D = diameter in inches, t = time in seconds, T = temperature in degree C, R = resolution of the device under test.
3. This laboratory offers field calibration services.
4. % = percent of reading unless otherwise indicated.
5. This scope is formatted as part of a single document including Certificate of Accreditation No. AC-2080.01



Version 001 Issued: 10/14/2016 Page 11 of 11
500 Montgomery St. Suite 625│ Alexandria, VA 22314│703-836-0025 │ www.anab.org


Comments are closed.